Branding confusion costs unisex fashion more than you’d think

Unisex fashion branding is the set of names, imagery, product labels, and messages a clothing brand uses to signal that garments are intended for people of different genders. When those signals conflict—such as a “gender-neutral” promise paired with gendered sizing, separate men’s and women’s shopping paths, or unclear fit information—the result can be confusion, abandoned purchases, returns, and weaker customer trust. The stakes are meaningful: the U.S. Census Bureau estimates that Gen Z, a generation often associated with greater openness to identity-inclusive products, accounts for roughly one-fifth of the U.S. population. Yet inclusive intent alone does not guarantee clear retail execution. This article examines how branding confusion arises, how it affects discovery and fit expectations, what retailers can learn from real-world practice, and how to measure and reduce the resulting costs.

Creates confusion: unisex fashion brand signals

Brand confusion occurs when shoppers cannot readily understand what a product is, who it is designed for, how it should fit, or where to find it. In unisex fashion, the term is often used alongside “gender-neutral,” “gender-inclusive,” and “nonbinary.” These labels overlap, but they are not interchangeable: “unisex” commonly describes a product offered without a gender restriction, while “gender-inclusive” can refer more broadly to design, representation, sizing, and shopping experiences that accommodate people across gender identities.

There is no single published industry statistic that isolates revenue lost specifically to unisex-branding confusion. That distinction matters: general evidence about online returns or cart abandonment can show the scale of retail friction, but it cannot prove that gender labeling alone caused a particular loss. Retailers should treat the following figures as context, then use their own customer research and analytics to measure the effect of confusing signals.

Naming and category labels

A category label is the language that helps shoppers locate and interpret a product. “Unisex,” “all-gender,” and “gender-neutral” can each communicate broad availability, but vague or inconsistent use may leave shoppers unsure whether a garment was designed for a particular fit, merely marketed broadly, or actually graded across a range of bodies.

The practical test is not whether a term sounds inclusive; it is whether the label accurately describes the product and is used consistently across search, navigation, product pages, and packaging. A brand that calls a collection “all-gender” but files products only under “men” and “women” creates a mismatch between promise and shopping experience. The Federal Trade Commission’s guidance on advertising substantiation offers a useful general principle: express and implied marketing claims should be truthful and supported by evidence.

Imagery and representation

Visual branding includes the models, poses, styling, and product photography that show shoppers how a garment looks on different people. If a label promises broad accessibility but photographs only one body type or presents the clothing in a strongly gender-coded way, shoppers may struggle to decide whether the product is for them.

Representation is not a substitute for practical information. A diverse campaign can attract attention, but customers still need clear measurements, fit notes, and images that make garment proportions legible. Brands should also avoid treating gender identity as a visual shorthand: a person’s appearance does not determine who may wear a product.

Sizing and fit communication

Sizing communication explains how a garment is measured and how its cut is expected to sit on the body. “Unisex” does not describe a standardized size system. Brands may adapt a traditionally men’s block, use a women’s block, or develop a separate pattern; without saying which, the label leaves a consequential question unanswered.

Fit guidance should state garment measurements, model height and size, intended ease, and relevant construction details such as shoulder width, rise, or inseam. This helps customers compare a product with clothes they already own instead of guessing from a gendered size conversion. It also reduces the risk that shoppers interpret “unisex” as meaning the same fit will work identically for everyone.

Raises purchase friction: unisex fashion customer costs

Purchase friction is the extra effort or uncertainty a customer faces between discovering an item and deciding to buy it. In unisex fashion, unclear labels, hard-to-find categories, and weak fit guidance can turn a simple shopping decision into a series of unanswered questions. The costs may appear as lost sales, customer-service contacts, returns, or reduced confidence in the brand—not only as a checkout abandonment event.

The scale of online shopping friction is well documented, although it should not be mistaken for a unisex-specific measure. Baymard Institute’s compilation of U.S. ecommerce studies has reported an average cart-abandonment rate of about 70%. That figure describes many causes across ecommerce, including unexpected costs and complicated checkout; it does not establish that gender branding accounts for a fixed share. It does underline why brands should remove avoidable uncertainty before customers reach checkout.

Search and product discovery

Product discovery is the process through which shoppers find relevant merchandise using menus, search, filters, recommendations, or store displays. If unisex items are inconsistently placed in men’s, women’s, or miscellaneous categories, customers may miss them even when the products meet their needs.

A clearer approach is to make products searchable by garment type, cut, fabric, and fit, while allowing gender-related browsing as an optional route rather than the only route. Search terms should reflect how customers actually describe products, and the same product should not receive contradictory labels across a brand’s site and marketplace listings. Retailers can test this with internal search logs: repeated searches that return no useful results, or searches followed by quick exits, may point to taxonomy problems.

Fit uncertainty, returns, and service workload

Fit uncertainty is a customer’s inability to predict how an item will sit or feel before buying. It can prompt shoppers to order multiple sizes, contact support, or avoid the purchase. In a 2023 report, the National Retail Federation estimated that retailers expected 16.5% of annual sales to be returned, worth approximately $743 billion across the retail sector. The estimate covers retail returns broadly; it does not isolate apparel or branding as a cause. For unisex labels, however, unclear sizing is a plausible and testable source of avoidable fit-related returns.

Returns carry operational costs: shipping, inspection, repackaging, markdowns, and customer-service time. A retailer should therefore track return reasons alongside product-page behavior. If a garment has unusually high returns marked “too large,” “too small,” or “not as expected,” compare its size chart, imagery, and copy with customer reviews and support inquiries before assuming the product itself is at fault.

Trust and brand credibility

Brand credibility is the customer’s belief that a company’s claims match its products and practices. When “inclusive” is prominent in campaign language but absent from sizing, navigation, or service policies, shoppers may see a gap between the promise and the experience. That gap can weaken trust even when the original intention was positive.

The American Psychological Association’s guidance on inclusive language emphasizes choosing terms that respect people and avoid unnecessary assumptions. Applied to fashion, this means asking customers how they prefer products and categories to be described, then making language consistent and understandable. It also means avoiding claims that imply a garment fits every body when no single pattern can do so.

Reduces friction: unisex fashion brand practices

A useful response to branding confusion is to make the product easier to understand rather than relying on a new label alone. This connects brand language to concrete product information, inclusive discovery, and reliable measurement. The aim is not to erase gender from every shopping journey, but to let customers find and evaluate clothing without being forced into a category that does not help them.

Build product pages around garment facts

A product page should explain the garment’s actual construction and fit. Include a size chart with garment measurements, the model’s measurements and worn size, fit descriptors such as relaxed or fitted, and notes about fabric stretch and intended layering. If a size conversion is provided, label it as a guide rather than a guarantee.

This approach is especially important where a brand uses one size range across customers with different body proportions. A single gender-neutral label cannot replace information about shoulder shape, torso length, waist placement, or leg cut. Clear details give customers a more reliable basis for choosing than a gender category alone.

Design navigation for multiple routes

A strong taxonomy lets shoppers browse by product type, fit, occasion, and size, while preserving gender-based routes for people who find them useful. For example, “shirts,” “wide-leg trousers,” and “relaxed fit” can sit alongside optional “men,” “women,” and “all-gender” collections, provided the categories are accurate and maintained.

Retailers should verify that filters work across the full inventory and that search results do not hide products because of inconsistent metadata. In physical stores, signs and staff guidance should make it easy to locate items without implying that customers must shop in a particular department.

Test language and performance

Brand teams can test whether labels are clear through customer interviews, moderated shopping tasks, and controlled comparisons of product-page wording. Useful measures include search success, product-page exits, conversion, size-related contact rates, return reasons, and repeat purchase. Break results down by product and channel where privacy and sample size allow; an overall average can conceal a confusing fit block or poorly labeled category.

Interpret experiments carefully. A change in conversion may result from price, stock availability, campaign traffic, or seasonality as well as clearer branding. Pair behavioral metrics with direct feedback so that teams learn not just whether a change performed differently, but why customers found it easier or harder to shop.

Use real-world practice as a learning case

Retailers including ASOS have used “genderless” or gender-neutral language for selected collections and merchandising initiatives. Such examples show that brands can present clothing beyond traditional men’s and women’s divisions, but a campaign label alone does not demonstrate that customers understand fit, sizing, or navigation. The useful lesson is to assess the entire journey: product naming, category placement, imagery, size information, and returns data must reinforce one another.

A practical chart for an internal review could compare four measures before and after a labeling or navigation change: search-to-product click-through, product-page conversion, fit-related return rate, and customer-service contacts about sizing. The chart should show the timeframe, product scope, and sample size, and should be presented as the retailer’s own evidence—not as a universal benchmark.

Conclusion: clear unisex fashion branding protects value

Unisex fashion branding works when its signals agree. Names and categories should explain what the product is; imagery should help customers assess it; and sizing information should describe how it is likely to fit. When those elements conflict, customers may have difficulty finding products, judging fit, or trusting the brand. General ecommerce abandonment and retail-return statistics demonstrate the scale of shopping friction, but they do not quantify the portion caused by unisex branding. Each company must measure that relationship with its own customer and product data.

Fashion teams can start by auditing product labels and navigation, adding garment-level measurements, reviewing fit-related return reasons, and testing language with shoppers. The broader implication is straightforward: inclusion is not only a campaign claim. It is also a product-information and retail-design challenge. Further reading on ecommerce usability, inclusive language, and returns measurement can help teams build a shopping experience that is both clearer and more credible.

Sources: U.S. Census Bureau, QuickFacts: United States, https://www.census.gov/quickfacts/fact/table/US/PST045224; Baymard Institute, 49 Cart Abandonment Rate Statistics, https://baymard.com/lists/cart-abandonment-rate; National Retail Federation, 2023 Consumer Returns in the Retail Industry, https://nrf.com/research/2023-consumer-returns-retail-industry; Federal Trade Commission, Advertising and Marketing Basics, https://www.ftc.gov/business-guidance/advertising-marketing; American Psychological Association, Inclusive Language Guidelines, https://www.apa.org/about/apa/equity-diversity-inclusion/language-guidelines.